Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It is discreet It does not include LED indicators or key fobs, and is concealed in the wiring of the vehicle.
It also allows users to temporarily disable the system through Transport Mode in the event of renting out their vehicle. This guide will guide you through the installation process of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against hacking, key cloning, and relay attacks. The system is directly connected to your vehicle's ECU and is protected by a unique PIN code that you can choose. It is undetectable by thieves using diagnostic scanners or other advanced methods. It isn't able to be disabled using circuit cuts.
The system is easy to use, but professional installation is recommended to ensure a clean connection with the ECU of your vehicle. An approved installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complement the protection package for your vehicle.
The first step is to disconnect the battery to prevent the possibility of airbag deployment and short circuits. After that, the installer can safely begin work. Basic hand tools are helpful for making precise connections, while a multimeter can be used to verify electrical values and safety. Insulation tape and cable tie are essential to protect connections and ensure that wiring is neat. The Ghost Immobiliser user's guide will provide specific guidelines tailored to your model.
It is crucial to select a grounding location that is free of dirt or paint during installation. The installer should also make sure the immobiliser's H and CAN L wires are connected to the correct ports on your vehicle's ECU. These wires can be plugged in or soldered depending on the model. To ensure a secure and long-lasting connection it is recommended you choose a high-quality plug.
Transport Mode can be activated by the client after the installation is complete. This allows the vehicle to be used by valet parking or mechanics without having to know the pin code. The customer must press the icon for service on the dashboard five times within 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's an excellent option for those who regularly rents their vehicle on platforms like Turo. An immobiliser can reduce the cost of insurance, as it reduces the risk of theft.
Getting Started
If you are seeking a solution to safeguard your vehicle from theft it is best to go with an autowatch ghost immobiliser. It protects your vehicle from starting even if a criminal steals or copies the key. This is due to its advanced technology that is designed to prevent the car's engine from starting until the correct PIN code is entered.
The device is connected to the vehicle's bus system CAN, allowing direct communication with the ECU. It makes use of the buttons on your dashboard and steering to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your car. This is the most secure way to safeguard your pride and joy. It will not lose its value in the event that you decide to sell it.
Installing an immobiliser from Ghost is simple, but you must follow the instructions to avoid electrical issues and malfunctions in the system. You must first locate a 12V power supply and a solid grounding on the car's chassis. After that, you can begin to connect the wires that will be used to activate the immobiliser. Use high-quality connectors, and soldering techniques for an effective connection. Also, make sure to insulate the connections with heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other problems.
Once the wires are connected, you can plug in the battery and start the engine to determine if the immobiliser is working. If everything is functioning properly you can place it in a secure place under the dash or somewhere else in the vehicle. Make sure to hide it properly to stop a thief from tampering with it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a top-quality deterrent to car burglars. It offers superior protection against key cloning, hacking and relay attacks, and cannot be disabled without knowing the code. The device is simple to use, and can be set up to an option for a service valet so that your vehicle will not be activated when you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is specifically designed to deter theft of vehicles. It connects directly to the car's CAN bus network and communicates with the ECU which makes it virtually undetectable to your car. The Ghost Immobiliser does not interfere with the factory settings of your vehicle, unlike other aftermarket systems which require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanning tools. The system doesn't transmit or receive radio frequency signals, but instead uses CAN data to communication with your ECU. Additionally, it doesn't require any modification to your car's existing key fobs.
To use the Ghost Immobiliser, simply turn on your car's ignition and enter your sequence for disarming (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. After that, you are able to start your car and drive away in peace.
Once installed, the Ghost Immobiliser will protect your car from key cloning and hacking while preserving the value of your most prized possession. In Transport Mode, you can temporarily disable the Ghost Immobiliser in case you have to hand your vehicle to service or valet park.
You'll need a constant power source (12V) and an earthing point to complete the installation of the Ghost immobiliser. Make sure that both are well-insulated and able to be touched. It's also recommended to use cable ties to tie and secure the wires. This will decrease the chance of being tampered with by thieves. Make sure you double-check the locations of these points to avoid mistakes, and mark them with a piece of tape or label. Verify all connections for signs that they're wearing out. Loose connections can lead to problems with the system, so be sure that they're firmly in place and properly insulated. Finally, don't forget to test the Ghost Immobiliser after the installation is completed. This will ensure that the unit functions properly and that all connections and insulation are secure. If there are any issues, make sure to address them immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your car's ECU to stop unauthorized motor starting. Its innovative technology safeguards your vehicle from key cloning and hacking along with other methods commonly used by thieves to steal cars. The Ghost is also able to work in conjunction with existing alarm and tracking systems to provide the best protection for your vehicle. The Ghost's unparalleled features, combined with its subtle design makes it a preferred choice for drivers who love cars and security-conscious drivers.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow the steps of the installation process. Consult the wiring diagram of your vehicle to assist you in locating and connecting the wires. You'll need to determine the power and grounding sources. Once you've located them, you'll have to mark them to make them easy to identify when installing. It's essential to use high-quality materials and tools. Basic hand tools will aid in making precise connections. car stolen with ghost immobiliser will check electrical values and guarantee security. Insulation tape and cable tie will keep all connections neat. A Ghost-specific user's guide is also available.
Before proceeding with the installation it is essential to test the system by entering the PIN code and starting the vehicle. This test will verify that the immobiliser works in the way it was intended, preventing unauthorized vehicle start-ups. This step should be done frequently as part of your regular inspections of your vehicle to ensure the system is always working correctly.
After the installation is completed After the installation is completed, you are able to drive your car with confidence. The Ghost will help keep your pride and joy safe from would-be thieves, ensuring that nobody can escape with your car without the proper PIN code. The Ghost can also be used with a tracker approved by Thatcham to identify any attempts to tamper with or steal your vehicle and allow you to track your vehicle in the event of it being stolen.
The Ghost is compatible with a range of automobiles, including those from all major manufacturers. If you're interested in securing your car using this advanced device, contact Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, which guarantees we follow strict standards for the installation of our products. This guarantees customers, insurance companies, and law enforcement agencies that installations are performed safely and in a safe manner.