Ghost Immobiliser Fitting
Protect your vehicle from theft of keys hacking, cloning, and theft with the world's first aftermarket immobiliser for CAN. The Ghost app and GPS tracking can be connected to the immobiliser to send you alerts when your car is stolen or tampered with.
Installing a Ghost immobiliser is a breeze for a skilled technician. Making use of the correct tools, insulation tape and heat shrink tubing is essential.
Getting Started
Contrary to physical theft protection devices like wheel locks or car alarms, ghost immobilisers protect your vehicle without the use of key fobs or LED indicators. Instead they connect directly to the ECU's CAN network and can only be activated after entering a PIN sequence. This gives a greater level of protection against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a high level of agility and accuracy. It's like walking through a minefield. A mistake could result in serious damage to your vehicle's circuits. It is crucial to know the procedure for installing and prepare your vehicle in a timely manner.
First, you must prepare the vehicle by removing interior panels to make room for the immobiliser device. Once you've found the perfect place to hide it and you have it, use cable ties to fix it. Clean up your wiring by tying loose wires down and using insulation tape to cover exposed connections. This can help reduce the risk of short circuits that are not intended to be there while also improving the aesthetics and decreasing the possibility of tampering with by thieves.
Find the source of constant 12V power and a grounding point for the ghost immobiliser. Once you have located them check the power cables with a multimeter. Connect the CAN H and L wires from the immobiliser to your chosen power source and grounding point.
ghost 2 immobiliser problems is essential to double-check all the connections and check the immobiliser to look for indications of corrosion. It is also important to test the system to ensure it is working properly by entering a PIN number and starting the engine. This should be an ongoing part of your routine because it will allow you to detect any issues that might be intermittent early. Regular testing can help increase the longevity of your device and ensure it is running at its peak.
Preparing your vehicle
The installation of the Ghost immobiliser is a complicated task that requires the right tools and expertise. A wiring diagram is essential for finding the correct wires, making precise connections and ensuring security. A multimeter can be used to check electrical values and ensure security. Insulation tape and cable ties can be used to shield the connections from tampering and keep them secured. A user's manual is available for the Ghost Immobiliser. It will provide you with specific instructions specifically tailored to the model.
Once installed, a ghost immobiliser is able to prevent unauthorised engine start by requiring the driver to input a unique PIN code sequence by pressing buttons on the steering wheel or centre console. The code can be altered at anytime by the vehicle owner, either manually or remotely via a mobile app. The device is also quiet and undetectable by thieves, since it doesn't emit radio frequencies.
Ghost immobilisers are directly connected to the CAN bus of the vehicle, a network which communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals generated by the ECUs and blocks the engine from starting when a false signal is detected. The system is tamper-proof and weatherproof, but it does not have key fobs or LED indicators to attract the attention of thieves.
It can be placed behind the dashboard or in a discreet area, so that it is not visible to thieves and doesn't hinder the performance of the vehicle. It can be placed in a small container so that it is less likely to be observed by untrustworthy salespeople during a test drive.
Its discrete operation and integration with the vehicle's CAN bus network make it an effective deterrent against the latest methods of car theft, including key cloning and signal relay attacks. Combining the system with other security measures will create an effective barrier to frustrate even the most persistent thieves. This is the reason why more insurance companies are suggesting or even requiring ghost immobilisers be fitted, as they can drastically reduce monthly premiums.
Making Connections
Unlike traditional security systems that can be heard by thieves, ghost immobilisers operate in a quiet manner to keep them from being aware that your vehicle has been switched on. They also stop high-tech methods used to steal vehicles, for instance, OBD port hacking. They can also be fitted without causing permanent damage to your vehicle which makes them a great option for those who are planning to sell their vehicle in the near future.
The Autowatch Ghost 2 CANbus immobiliser is among the most recent and most reliable solutions for preventing car theft. It uses the CAN data network to shut down your engine and generates a PIN code that only you know, so it's hard for thieves to recognize. It is compatible with various vehicles, and it works with a variety of features already installed including car alarms and steering wheel locks. GPS trackers, and door lock bypass.
If you decide to opt for an Ghost immobiliser, make sure to refer to the wiring diagram for your specific vehicle model to identify the wires to connect. Double-check the locations of these wires to ensure that they are in the correct location, and mark them with labels or tape to aid in keeping the track of them. You'll also need to locate a source of continuous power (12V) and a grounding point to the system. Once you have the necessary components, you can begin making the connections to complete the installation.
The ghost immobiliser won't allow your vehicle to start unless you enter a pin code through the buttons of the dashboard or steering wheel. This will stop ECU hacking or key cloning and other techniques of theft from vehicles. It can also be used with other Thatcham approved security devices like alarms or tyre clips to give your vehicle an even higher level of protection.
As the UK automotive aftermarket industry expands and expand, so do the options for securing your vehicle. There are many ways for thieves to gain access into your vehicle and steal it, which is why it's crucial to do all you can to prevent it from being taken away. Ghost immobilisers are a popular choice among car owners who are accountable.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU through an CAN network. This prevents the engine from starting until the PIN code has been entered. This makes it extremely difficult for thieves copy the key fob that you use to start your vehicle, and more difficult to disable the system through hacking its electronics.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to assist you to locate your vehicle in the event that it is stolen. This is a feature that is not commonly found in security products that are sold aftermarket however it is an excellent way to improve the security of your vehicle and give you peace of peace of.
The Ghost-II immobiliser offers not only an enhanced security, but also a convenient experience for the user, by getting rid of the need for additional key fobs or devices. It features an easy and simple PIN code entry system that integrates seamlessly into your daily routine. It also has convenience features and deactivation settings that let you temporarily disable the immobiliser in order to park or service your vehicle.
Make sure you have the tools you need and get familiar with the wiring of your vehicle. A basic set of hand tools will allow you the ability to create precise connections, and a multimeter is a great tool to check electrical values. Insulation tape and heat-shrink tubing is essential to shield connections from short circuits. Cable ties can be used to secure wiring. It's also important to work in a place that is well-lit, and wear safety equipment when working with electrical components and tools.
You should test the Ghost immobiliser once you have completed the installation to verify that it's functioning properly. Try to start the car without entering the PIN. If this fails, you will need to test again and examine the connections more thoroughly.
In contrast to other security systems unlike other security systems, the Ghost Immobiliser is a covert device that is not spotted by thieves and is much more effective than traditional physical deterrents like wheel clamps or steering locks. It is TASSA acknowledged and approved by some insurance companies, which makes it an investment that's cost-effective and can give you the peace of mind you need.